Installation guide

DATE FORMAT
(1) Select “Date Format” using [◀/▶] or [▲/▼] arrow button and press [Enter] button. Select a
value using [◀/▶] arrow button from YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY.
(2) Press [ESC] after finishing value setting.
TIME
(1) Select “Time” using [◀/▶] or [▲/▼] arrow button and press [Enter] button.
(2) Select Date, Time using [◀/▶] arrow button and set value using [▲/▼] arrow button.
(3) Press [ESC] after finishing value setting..
APPLY
Most setting values are applied automatically, when exiting form the related menu page. But
“Date” & “Time” setting are not applied automatically because they may critically affect the file
system of the recorded HDD. To apply Date/ Time settings confirm with [Apply Date/Time]
buttons.
(1) Select “Apply Date/ Time” using [◀/▶] or [▲/▼] arrow button and press [Enter]. Then, a
warning message will be appeared as below image;
(2) Select using [◀/▶] or [▲/▼] arrow button and select “YES”, then, press [ENTER] button.
To cancel, press [ESC] button.