Installation guide

Installaction & User Manual
114
6.6 Recording setup
There are 3 mode for recording – schedule recording, manual recording, event recording.
Schedule recording records according to the configured schedule. And manual recording
records via pushing “REC” button and event recording records when events are on.
6.6.1 Program setup
Using [Program], adjust frame rate and quality and resolution and configure recording program
for Manual&Event&Schedule.
In event recording, one channel can record up to its max frame rate and if setting 2 channels
as event recording, their recording frame rate will be adjusted automatically.
Program
There are 9 programs from A to I composing recording quality and resolution per channel.
Please, refer to 3.5 program configuration value.
CH (Channel)
Display the channel figure.
R (Resolution)
There are 3 resolutions - D1(704x480), Half D1(704x240), CIF(352x240)
F (FPS)
It means frame per second and can select 1 to 30fps per second. Max. frame can be changed
according to the configuration.
Q (Quality)
There are 5 recording quality - Q5/Q4/Q3/Q2/Q1. Recommended quality for event recording is Q3.