Installation guide

Installaction & User Manual
102
Header check
It has the various type of data input from the external device (Access Control, POS, ATM etc.)
but it’s not necessary for a device which is supported its protocol by DVR .Like VSI Pro, VSI Pro
Hydra, and Star Finger 007, it is not needed when the protocol of these device have
implemented on the device. If not, this is the parameter to analyze how the one of data is
constructed from the text data that is input continuously.
Namely, all data has the first and the end. Header indicates the information that already inserts
to inform its starting. Therefore, Header information is defined here to acknowledge its starting
of a data. The reason of 2 Header is to detect maximum 2 data out because each device can
output various data’s.
Delimiter
Delimiter value can be different according to the manufacturer, please, refer to the product
manual or seller.
Time out
Following lines defined here means maximum number of text line from one data. Even if there is
standized data, there can be a short and long data. For example, there are 3 lines to write
names on ATM. But some may need only First name & Last name to register. Which it means
requires only 1 shorter than other ATM users. It is to decide the last line of the one data register
as final complete data to save after an hour’s consideration of register later because DVR can
not recognize it automatically.
Lines
Define how many lines will be shown.
Caution : external device can not be recognized, please, ask to the seller.