User's Manual

i-Rec B104 User’s Guide
33
2) Connection
Select Cam: To connect the Cam, select a Cam first by using the ‘Cam Selection’ button. If there are no
selected Cam and you click the ‘Connection’ button, the Cam Selection dialogue will appear. Setting
method is same with ‘Configuration’ page.
Select a Cam by double-clicking or pressing the ‘OK ’ button. After the Cam is selected the Cam will be
indicated at ‘Nick Name’ item. When pressing ‘Connection’ button, you may access the Login menu.
Login : Enter ‘User Name’ and ‘Password’. If ‘Port #’ is configured different ly, you can change it manually.
If the selected Cam is registered, you can utilize ‘Save Password’ function. User’s ID that has accessed it
last is indicated in ‘User Name’ of Login menu, and default value of ‘Configuration’ page is indicated in
Port #. If you change Port # in ‘Configuration’ page, click the ‘Cam Selection’ button and select a camera
in ‘Cam explorer’ again.
In this panel, user may change password within 14 English characters or numbers, but administrator cannot
change it in this panel. It is because administrator’s ID is fixed and common user may interrupt the whole
system with using administrator’s ID by stealth.