User's Manual

i-Rec B104 User’s Guide
16
2) Log–in Screen
Enter ‘User Name’ and ‘Password’. ‘User Name’ is fixed as ‘admin ’. If the ‘Save Password’ is checked,
you don’t need to enter the Password whenever you log in. ‘Save Password’ function may only be utilized
if the Cam is registered on the ‘My Cameras’ directory.
To change IP address, enter the new IP address and press ‘Change IP’ button. If the connected Cam doesn’t
have the same local network IP address, administrator cannot access it. In the case, administrator should
change IP address with a local one, and then may access the Cam to configure it.
After keying in password, click the ‘Login’ button. This will allow you to access the configuration page of
CamViewer II. To affirm the changed description, click the ‘Apply ’ button certainly.