User manual

9
DEFOG Images can be corrected on Fog, Dust environment.
- AUTO : Automatically corrects the images.
- MANUAL : can be set to LOW, MIDDLE, HIGH
COLOR BAR Prints “COLOR BAR” for testing. (2 types)
If there are no action, it will close in one minuate.
WDR This 3D backlight compensation function allows bright and dark area to
be seen clearly together.
- WDR WGT(0~4) : Select image mix ratio. The higher value, the bright
part of the image appear more clearly
BLC Back light compensation function.
- BLC LEVEL(LOW, MIDDLE, HIGH) : Set BLC level.
- BLC OSD : Displays BLC area on the screen.
- BLC POS-X, Y : Set X, Y start position.
- BLC SIZ-X,Y : Set Width and Height size.
- MASK : If there is very bright portion inside BLC area, this portion can
be removed from the calculation of BLC compensation. This brightness
level for masking can be decided by below MASK LEVEL.
- MASK LEVEL(0~10) : Set brightness level for Masking.
HLC High Light Compensation. If there is very bright portion inside a scene,
camera can mask the portion, and the portion is removed from the
calculation for exposure control.
- LEVEL(5, 0~10) : Set the brightness level for masking.
- Color : Set masking color
ACE
(ON, OFF)
Adaptive Contrast Enhancement. Enhances image quality by raising the
brightness of dark areas.
DNR
(LOW, MIDDLE, HIGH)
Reduce image noise under low light condition
FRAMERATE
(25Hz, 30Hz)
Power frequency 60Hz(NTSC) : 30Hz(fps) video output
Power frequency 50Hz(PAL) : 25Hz(fps) video output
SYSTEM MODEL Displays model name
CAM ID Max. 8 digits for camera name.
Supports alphanumeric and some special characters
RS485 ID Set ID for RS485
VERSION Displays firmware version
VIDEO Full-Scale(BT 709), Comp-Scale(BT 601) support
RESOLUTION Set output resolution (1080p/720p).
IR-LED
(ON,OFF)
- Controls IR-LED.
- Smart-IR : When there are no motion detected. It
keeps the image at the brightest. When the camera
detects a motion, it automatically controls its shutter