User manual

6
4. Insert DVR’s Port, User ID, Password and press “Connect” to log-in to the DVR.
5. Select [ON] in Camera OSD Control, then press E,L,R,U,D buttons to check camera’s OSD
control.
- When OSD control is not available, check DVR and camera’s configuration.
6. Select the F/W and press “Load” to upgrade the camera. The camera will reboot.
- Images will be stopped until the boot is complete.
7. When the upgrade is finished, the DVR and CMS (Control CenteR) can be used to
remotely change the camera’s settings.
<Note>
1) When upgrading F/W, the setting will be reset.
How to use OSD menu
OSD menu function
Press [SET] on the remote controller to show OSD configuration menu.
- If OSD menu is not closed, it will be closed automatically in 1 minute.
(Changed configuration value will not be saved)
- Bold font with underline means factory default.
OSD MENU Function
FOCUS ADJ This mode is only enabled in manual lens model. This function prevents
out-focus during day/night.
LENS DC Only in AF models : focus can be adjusted either
automatically or manually.
- PWR-ON AF : After power is turned on, camera
judges the ambient brightness. If the brightness is
enough, it performs Auto Focusing automatically, but
if the brightness is not enough, it keeps the previous