User manual

4
Camera installation
1. How to connect it with the WEBGATE PoC DVR
- Does not need any additional power adapter. Just connect coaxial cable higher than
4C-HFBT to the DVR.
2. How to connect it with the conventional DVR
- Connect the PoC repeater, RP101P, between the camera and DVR. And put additional
power adopter.
How to Set up Auto Focus
Manual Focus Model : C1080PD / C1080PVD / C1080PD-IR / C1080PVD-IR
To prevent out focus due to weather or environmental changes, please follow the bottom
instruction.
1) Press [SET] on the OSD remote controller and select “FOCUS ADJ” to enable “Adjust
Focusing” mode.
2) Use the lens’ lever to adjust zoom and focus.
3) End the “Adjust Focusing” mode by pressing the [SET] on the OSD remote controller.
Auto Focus Model : C1080PD-AF / C1080PVD-AF / C1080PD-IR-Af / C1080PVD-IR-AF
1) Press [SET] on the OSD remote controller and select “FOCUS ADJ” to enable “Adjust
Focusing” mode.
2) Hit “MANUAL”, go into “Manual Focusing mode”.
3) Hit “Tele” or “Wide” button to adjust.
4) Press [SET] on the OSD remote controller and to end Manual Focusing Mode.
5) Select “CORRECT AF” and hit [SET] to run “Auto Focusing function”.
<Note>
1) When adjusting focus, AF Models(C1080PBL-IR18-AF, C1080PBL-IR48-AF) will
automatically run “Adjust Focusing function”.