User manual

6. Select the F/W and press “Load” to upgrade the camera. The camera will reboot.

- Images will be stopped until the boot is complete.

7. When the upgrade is finished, the DVR and CMS (Control CenteR) can be used to

remotely change the camera’s settings.

<Note>

1) When upgrading F/W, the setting will be reset.

How to use OSD menu

OSD menu function

Press [SET] on the OSD remote controller to show OSD configuration menu.

- If OSD menu is not closed, it will be closed automatically in 1 minute.

(Changed configuration value will not be saved)

- Bold font with underline means factory default.

OSD MENU

Function

FOCUS ADJ

(C1080PBL-

IR18)

This mode is only enabled in manual lens model. This function prevents

out-focus during day/night.

LENS

Only in AF models : focus can be adjusted either

automatically or manually.

- PWR-ON AF : After power is turned on, camera

judges the ambient brightness. If the brightness is

enough, it performs Auto Focusing automatically, but

if the brightness is not enough, it keeps the previous

focus condition.

- Correct AF : Camera performs focusing over the full-