User manual

6
- D&N AF : Autofocusing after Day&Night chages
DAY
&
NIGHT
Color
Maintains Color(Day) mode regardless brightness.
B&W
Maintains B&W(Night) mode regardless brightness.
Auto
In accordance with brightness, camera switches Color
mode and B&W mode automatically.
- LUX LEVEL(LOW, MIDDLE, HIGH) : This value is the
standard for Day & Night switching. If high is
selected, camera will turn to Night(B/W) mode at
higher LUX level than MIDDLE or LOW.
- ANTI HUNT(LOW, MIDDLE, HIGH) : This value is the
standard for threshold of Day & Night switching.
Higher setting value will reduce the flickering by
IR-CUT filter switching caused from misjudgment.
- DELAY TIME(3~30sec) : Judgment period for Day &
Night switching
EXPOSURE
BRIGHTNESS
(8, 0~20)
Adjust the brightness of image.
The more High value it has, the more bright image it
shows
SHUTTER
AUTO : In accordance with the brightness, shutter
speed is automatically changed
MANUAL : User can change the shutter speed
manually between 1/30 and 1/60000.
INDOOR : Optimized to indoor environment.
OUTDOOR : Optimized to outdoor environment like
fast moving object like car running.
ANTI-FLICKER : Removes Flicker problem due to the
discordance of light frequency.
DSS
(OFF, x2~x10)
At night time or very dark condition, it accumulates
the amount of light into the image pixels and provides
more clear video image. But the higher setting value
may make more severe motion blur accordingly.
AGC
(7, 1~10)
It will amplify video gain according to the light
condition, but it will also increase noise level.
COLOR
AWB
- AUTO : This mode automatically adjusts color white
balance between 1,700°K ~ 11,000°K.
- PRESET : Shoot a white paper in front of camera and
press MENU button then white balance working will
stop suitable for the condition. You must do this
process again if light condition is changed.
- MANUAL : User can select color temperature among
3300°K, 4300°K, 7600°K and adjust the details by