User manual

8. Please pay attention while F/W upgrade into the latest version and F/W upgrade with wrong F/W will
make camera work abnormally. Please refer to below classified table to check F/W version.
1) Directions for upgrade of camera
+ If the camera is upgraded with wrong F/W, camera will not be working normally.
+ C1080B/BM model can be upgraded with the latest F/W regardless of mechanical part and lens.
+ Please upgrade B type after checking lens.
+ Please be noted not to disconnect power and RS485 connection during upgrade
+ The image of camera will remain stop while it is being upgraded and it takes maximum 3 minutes
to complete upgrade.
+ Please try upgrade one more time once the camera is not working normally after 9 minutes from
the beginning of upgrade.
+ A type model without RS485(green, white) line in cable will not be supporting upgrade.
2) Upgrade classified table
+ By mechanical part = A type : OLD mechanical part, B type : NEW / by lens = a type : OLD, b type :
NEW
Classification
A type
By
mechanical
part
F/W
Non AF Series : C1080BM_v1.13.0
AF Series : C1080AF_v1.13.0b