User manual

button.
<Note>
1) User doesn’t need to enter port number even though connected DVR has specific port. Just enter IP address of DVR.
2) Select correct F/W per model. Otherwise camera might not show correct display.
- C1080B : C1080B_v1.xx.x.bin
- C1080BM : C1080BM_v1.xx.x.bin
- C1080D Series(D,VD,D-IR,VD-IR) : C1080VD_v1.xx.x.bin
- C1080AF Series(D-AF,D-IR-AF,VD-AF,VD-IR-AF,BL-IR18-AF,BL-IR48-AF) : C1080AF_v1.xx.x.bin
3) The upgrade time via Network will be various based on environment and Baudrate.
- Baudrate 9600 : About 2min 20sec
- Baudrate 57600 : About 1min 30sec
3) Once upgrade is done after click ‘Load’ button, it takes about 1min 20sec ~ 2min for upgrade.
In this case, camera display looks white as if it is over exposed but please be noted that this is not a bug.
But in case the display keeps halted after 2 min, please click on Load button in HD_Camera_Upgrader one more time to
proceed with upgrade.
6. Once camera upgrade is done and image looks normal after finishing step 5, then select upgraded
channel in single channel mode in Control Center Monitor.
Then click on right button of mouse to enter popup menu and go to “Camera Setup”.