VIZIO VO32L FHDTV10A User Manual Dear VIZIO Customer, Congratulations on your new VIZIO VO32L FHDTV10A High Definition LCD Television purchase. Thank you for your support. For maximum benefit of your set, please read these instructions before making any adjustments, and retain them for future reference. We hope you will experience many years of enjoyment from your new VIZIO VO32L FHDTV10A High Definition Television. For assistance, please call (877) 698-4946 or e-mail us at techsupport@vizio.com.
VIZIO VO32L FHDTV10A User Manual Important Safety Instructions Your HDTV is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent your HDTV from being damaged, the following rules should be observed for the installation, use, and maintenance of your HDTV. Read the following safety instructions before operating your HDTV. Keep these instructions in a safe place for future reference.
VIZIO VO32L FHDTV10A User Manual ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! Do not overload power strips and extension cords. Overloading can result in fire or electric shock. The wall socket should be installed near your HDTV and easily accessible. Only power of the marked voltage can be used for your HDTV. Any other voltage than the specified voltage may cause fire or electric shock Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms.
VIZIO VO32L FHDTV10A User Manual Television Antenna Connection Protection External Television Antenna Grounding If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.
VIZIO VO32L FHDTV10A User Manual Opening the Package Your VIZIO VO32L FHDTV10A and accessories are carefully packed in a cardboard carton that has been designed to protect it from transportation damage. Now you have opened the carton check that the VO32L FHDTV10A is in good condition and that all of the accessories are included. The VO32L FHDTV10A weighs approximately 28 lbs and is about 32” wide; please exercise care when unpacking the HDTV.
VIZIO VO32L FHDTV10A User Manual Additional Certified Accessories for the VIZIO VO32L FHDTV10A are sold separately Wall Mounts High Definition Cables Extra or replacement Remote VIZIO also offers Installation Services and Extended Warranty Services for your VIZIO VO32L FHDTV10A To purchase or inquire about additional accessories and services for your VIZIO product, visit our web site at www.VIZIO.
VIZIO VO32L FHDTV10A User Manual TV Setup and Stand Assembly Note: We strongly recommend that two people perform the setup and assembly due to the weight and size of the TV. To unpack the TV and stand base: 1. Remove the remote control, batteries, and power cord from the foam end caps. 2. Remove the two top foam end caps. 3. Remove the stand base under foam end cap. 4. Remove the TV from the box and lay it face down on a clean, flat surface.
VIZIO VO32L FHDTV10A User Manual Preparing Your LCD HDTV for Wall Mounting To remove the stand base 5. Unplug all of the cables and cords from your VO32L FHDTV10A. 6. Place the VO32L FHDTV10A face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the TV. 7. Push up the plastic panel on the back of the stand and lift it away once to release. 8. Remove the eight (8) screws that were hidden by the panel, while holding the base. 9. Carefully remove the stand base.
VIZIO VO32L FHDTV10A User Manual Table of Contents Chapter 1 Basic Controls and Connections.......................................................... 11 Front Panel..............................................................................................................................................................11 Side Panel Controls.................................................................................................................................................
VIZIO VO32L FHDTV10A User Manual Tuner Mode ........................................................................................................................................................49 Auto Search........................................................................................................................................................49 Partial Channel Search.............................................................................................................................
VIZIO VO32L FHDTV10A User Manual Chapter 1 Basic Controls and Connections Front Panel POWER ‘VIZIO’ LIGHT– The VIZIO name lights white when powered on and orange when powered off. REMOTE CONTROL SENSOR – This is the window through which all of the remote control signals pass to the sensor. Point the remote control directly at this window for the best response to the remote signal. Side Panel Controls POWER ( ) – Switch the VO32L FHDTV10A on by pressing the button once.
VIZIO VO32L FHDTV10A User Manual Rear Panel Connections 1 3 2 4 5 6 1. 8 9 10 7 SERVICE – This custom communication port is for factory service only. Use of this input for any purpose other than factory authorized service will void the manufacturer’s warranty of this equipment. 2. HDMI 1 – Connect the primary source for digital video such as a DVD multimedia player or set top box through this all digital connector. The white color band on the rear of the TV indicates this connection. 3.
VIZIO VO32L FHDTV10A User Manual Right-Side Panel Connection 1. HEADPHONE – Connect your headphone here for personalized listening without disturbing others. 2. AV2 – Connect the secondary source for composite video devices, such as a VCR or video game. Use the white and red connectors to connect the external audio from the same source, then use the yellow connector to connect the external video from the same source. The orange color band on the side of the TV indicates this connection.
VIZIO VO32L FHDTV10A User Manual VIZIO Remote Control GUIDE – This button displays program information. Press this button once when in TV mode and the information of the program being viewed is shown. Press it a second time and the Electronic Programming Guide will appear in the screen. In any other mode when this button is pressed, the screen will display the selected input plus the definition of the signal; i.e. HDMI 720p, HDMI 1080i, etc.
VIZIO VO32L FHDTV10A User Manual INPUT – This button allows the user to cycle through the inputs. Repeatedly pressing of this button will step you through the input sources in the following sequence: TV, AV1/S-VIDEO, AV2, Component 1, Component 2, RGB, HDMI 1, HDMI 2 and HDMI 3. Once you have stepped through the entire sequence, you will return to the beginning. - (DASH) – When selecting a digital channel directly use this button for the separation of main and sub-channels.
VIZIO VO32L FHDTV10A User Manual Insertion of Batteries in the Remote Control Insert two AA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment. Re-attach the battery cover. Precautionary Tips for Inserting the Batteries: Only use the specified AA batteries. Do not mix new and old batteries. This may result in cracking or leakage that may pose a fire risk or lead to personal injury.
VIZIO VO32L FHDTV10A User Manual Chapter 2 Connecting Equipment Which Video Connection Should I Use? The VIZIO VO32L FHDTV10A has six different ways to connect your video equipment from a basic connection to the most advanced for digital displays.
VIZIO VO32L FHDTV10A User Manual Connecting Coaxial (RF) Using Your Antenna or Digital Cable for DTV 1. 2. 3. 4. Turn off the power to the HDTV. Connect the coaxial (RF) connector from your antenna or digital cable (out-of-the-wall, not from the Cable Box) to the DTV/TV CABLE/ANTENNA connector on the rear of the HDTV. Turn on the power to the HDTV. Select DTV using the INPUT button on the remote or side of the HDTV, or directly by pressing the TV button on the Remote Control.
VIZIO VO32L FHDTV10A User Manual Connecting Your HDTV Set-Top Box Using HDMI Input HDTV Set-Top Boxes that have a HDMI digital interface should be connected to the HDMI input of the LCD HDTV for optimal results. Note: To maintain the display quality, use a VIZIO certified HDMI cable. Length is available up to 10 meters. See www.VIZIOCE.com or call 1-888-VIZIOCE (1-888-849-4623) for details. Connecting your HDTV Set-Top Box (Best): 1. 2. 3. 4. Turn off the power to the HDTV and HDTV Set-Top Box.
VIZIO VO32L FHDTV10A User Manual For HDTV Set-Top Boxes with DVI: 1. 2. 3. 4. 5. Turn off the power to the HDTV and HDTV Set-Top Box. Using a HDMI-DVI cable, connect the DVI end to your HDTV Set-Top Box and the HDMI end to the HDMI 2 Input (white color area) at the rear of the HDTV.
VIZIO VO32L FHDTV10A User Manual Using Component Video Connecting your HDTV Set-Top Box (Better): 1. 2. 3. 4. 5. 6. 7. Turn off the power to the HDTV and HDTV Set-Top Box. Connect the Y (green color) connector on your HDTV Set-Top Box to the corresponding Y (green color) connector in the Component1 group (green color area - row of connectors nearest to you when viewing from the rear of the TV) at the rear of the HDTV.
VIZIO VO32L FHDTV10A User Manual Connecting Your Basic Set-Top Box Using Composite Video 1. 2. 3. 4. 5. Turn off the power to the HDTV and Set-Top Box. Using the AV Cable, connect the Video (yellow color) connector on your Set-Top Box to the corresponding Video (yellow color) connector in the AV1 input (yellow color area) at the rear of the HDTV.
VIZIO VO32L FHDTV10A User Manual Connecting Your DVD Player You have several options for connecting your DVD player to your VO32L FHDTV10A; HDMI, Component, AV (S-Video or Composite) inputs. Based on your configuration, you can decide which option is right for you. Using HDMI Input DVD players that have a digital interface such as HDMI (High Definition Multimedia Interface) should be connected to the HDMI input of the VIZIO VO32L FHDTV10A for optimal results.
VIZIO VO32L FHDTV10A User Manual For DVD Players with DVI: 1. 2. 4. 5. Turn off the HDTV and DVD player. Using a HDMI-DVI cable, connect the DVI end to your DVD player and the HDMI2 end to the HDMI Input (white color area) at the rear of the HDTV. 3. Connect an audio cable (white and red connectors) to the audio output connectors associated with the DVI output of the DVD player and connect the other end to the audio connectors by the HDMI input (white area) at the rear of the HDTV.
VIZIO VO32L FHDTV10A User Manual Using Component Video Connecting your DVD Player (Better): 1. 2. 3. 4. 5. 6. 7. Turn off the power to the HDTV and DVD player. Connect the Y (green color) connector on your DVD player to the corresponding Y (green color) connector in the Component1 input (green color area - row of connectors nearest to you when viewing from the rear of the TV) at the rear of the HDTV.
VIZIO VO32L FHDTV10A User Manual Using S-Video (AV1/S-VIDEO) Connecting your DVD Player (Good): 1. 2. 3. 4. 5. Turn off the power to the HDTV and DVD player. Connect the S-Video jack on the rear of your DVD player to the SVideo jack in the AV1/S-VIDEO input (yellow/red area) at the rear of the HDTV.
VIZIO VO32L FHDTV10A User Manual Connecting Your VCR or Video Camera 1. 2. 3. 4. 5. Turn off the HDTV and VCR or Video Camera. Connect the S-Video jack on the rear of your VCR or Video Camera to the SVideo jack in the AV input (yellow/red area) at the rear of the HDTV.
VIZIO VO32L FHDTV10A User Manual Connecting an external Receiver/Amp 1. 2. 3. Turn off the power to the LCD HDTV and Receiver/Amp. Using an audio cable (white and red connectors), connect the cable to the audio input connectors on the Receiver/Amp and connect the other end to the ANALOG OUT (white area) audio connectors at the rear of the LCD HDTV. Turn on the power to the LCD HDTV and Receiver/Amp. 4. button on the Then press the remote control to open the On-Screen Display (OSD) menu. 5.
VIZIO VO32L FHDTV10A User Manual Optical Output of Audio received If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical AUDIO OUT (white area) at the rear of the VO32L FHDTV10A. 1. 2. 3. Turn off the power to the LCD HDTV and Receiver/Amp. Using an SPDIF cable, connect the cable to the audio input connector on the Receiver/Amp and connect the other end to the OPTICAL OUT (white area) audio connectors at the rear of the LCD HDTV.
VIZIO VO32L FHDTV10A User Manual Connecting a PC Computer 1. 2. 3. 4. 5. Turn off the power to the HDTV and PC Computer. Connect a 15-pin D-Sub RGB (VGA) cable to the RGB output of your pc computer and the other end to the RGB PC input (blue area) at the rear of the HDTV. Connect the Audio Out on your pc computer to the RGB PC Audio input (blue area) at the rear of the HDTV. Turn on the HDTV and PC Computer. Select RGB using the INPUT button on the remote or side of the HDTV.
VIZIO VO32L FHDTV10A User Manual Preset PC Resolutions If connecting to a PC through the RGB PC input, set the TV timing mode to VESA 1920x1080 at 60Hz for best picture quality (refer to the graphic card’s user guide for questions on how to set this timing mode). Please see the table below for the factory preset resolutions. Resolution Refresh (Hz) H.Freq (kHz) V.Freq (Hz) H.Sync V.Sync Pixel Rate (MHz) Remark 640x480 60 31.46 59.94 N N 25.17 Windows 640x480 75 37.5 75 N N 31.
VIZIO VO32L FHDTV10A User Manual Chapter 3 Setting Up to Watch Television For ‘Preparing Your LCD HDTV for Wall Mounting’, see page 8. Basic LCD HDTV Start Up 1. Connecting the Power Cable Connect the power cord to the power cord connector on the back of the HDTV, and then plug the power cord into an AC wall socket. 2. Connect Audio and Video Cables to the HDTV (see Chapter 2 for detailed steps) 3.
VIZIO VO32L FHDTV10A User Manual If Retail Mode is selected by mistake; the next option will allow you to switch your selection back to Home Mode. Press the next screen. button on the remote to go to the Note: At this point, if a set-top box from your cable or satellite service company is being used; please press the LAST button on the remote control and skip to Step 5. Otherwise continue with next step: a. The Tuner screen will be displayed.
VIZIO VO32L FHDTV10A User Manual c. The screen will now change to show the progress of the search for Analog (NTSC) and Digital (ATSC) channels. Note: DTV digital broadcast is not available in all areas. Refer to www.antennaweb.org to get information about availability in your area, type of antenna and in which direction to point your antenna. The channel availability through cable depends upon which channels your cable operator supplies in Clear QAM; consult your cable operator for more information. d.
VIZIO VO32L FHDTV10A User Manual 5. Select Input Source Select the Input Source for the HDTV by pressing the INPUT button on the side of the TV or using the Input button on the remote control. Pressing this button will cycle you through the following options: TV, AV1/S-VIDEO, AV2, Component1, Component2, RGB, HDMI1, HDMI2, and HDMI3.
VIZIO VO32L FHDTV10A User Manual 6. Fine Tuning your TV set for Home Use. After completing Procedure 4 or Procedure 5; please follow the steps below to optimize your TV set display: a. Press the key to bring up the Menu display. Use the or button to scroll to the Advanced Video option. b. Press the c. d. Press the button to select it. or button to scroll to the Color Use the Temperature option. button to select it. or button to change e.
VIZIO VO32L FHDTV10A User Manual Note: If Procedure 4 had been done, you would like to do the following to ensure that the correct program times are shown when pressing the Guide key: Press the Menu key, this will bring up the picture mode menu. or button scroll across to the Press either icon showing the little satellite dish or antenna. The next screen will appear showing Time Zone. Press either or button to select it. or button to choose the Press either proper Time Zone of your area.
VIZIO VO32L FHDTV10A User Manual Watching a TV Program Before you start watching TV, please make sure that any cable, satellite or off-air antenna connections are secure. Also, verify that the power cord is plugged into a correctly grounded electrical outlet or surge protector. 1. Press the power button on the remote or on the side of the HDTV. The VIZIO logo on the front will change from orange to white. 2. There are 3 options for selecting your programming: a.
VIZIO VO32L FHDTV10A User Manual Adjusting Basic HDTV Settings Volume To adjust the volume, press and hold the VOL+ or VOL- button on the side of the LCD HDTV or remote control until the desired level is reached. TV Channels To step up or down through the available TV channels, press the CH+ or CH- button on the side of the HDTV or remote control once for the next or previous channel, or hold it depressed until the desired channel is reached. Note: Channel up and down will only operate in DTV and TV modes.
VIZIO VO32L FHDTV10A User Manual Program Information Press the GUIDE button twice on the remote and program information for the channel you are watching will be displayed on the screen with the live program content in a small window in the lower left corner. or button to scroll up or down the channels. Each time you pause at a channel, the Press the program list will update with the program schedule for the channel and the window will show the live program for that channel.
VIZIO VO32L FHDTV10A User Manual Chapter 4 Advanced Adjustment of HDTV Using the On Screen Display (OSD) The remote control or the control buttons on the right hand side of the TV can control all the function settings. The On Screen Display (OSD) allows you to adjust the save contrast, brightness and other settings. The TV will save changes made to the settings, even if the TV is turned off. The OSD consists of several menu options: Picture Adjust, Audio Adjust, Setup and TV Tuner Setup.
VIZIO VO32L FHDTV10A User Manual DTV / TV Input Picture Adjustment Picture Mode When the page. Press the button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment button to highlight the Picture Mode selection. or Use the and Baseball. button to choose from Custom, Standard, Movie, Game, Vivid, Football, Golf, Basketball Picture Adjustments are available for you to set them to your preferred settings.
VIZIO VO32L FHDTV10A User Manual Brightness Press the button to highlight the Brightness selection. button to start adjusting the brightness and the menu page will disappear and be replaced Press the by a small Brightness Indicator Bar so you can see the brightness level between the minimum and maximum available levels. Use the or button to adjust the level. The Brightness adjusts the black levels in the picture.
VIZIO VO32L FHDTV10A User Manual Tint Press the button to highlight the Tint selection. button to start adjusting the tint and the menu page will disappear and be replaced by a Press the small Tint Indicator Bar so you can see the tint adjustment to the left or right of the nominal position. Use the or button to adjust the level. The Tint adjusts the hue of the picture. The easiest way to set tint is to look at flesh tones and adjust for a realistic appearance.
VIZIO VO32L FHDTV10A User Manual Color Enhancement Press the button to highlight Color Enhancement. Use this feature to increase the picture reproduction performance of the picture. or button to choose from Off, Normal, Rich Color, Green/Flesh and Green/Blue setting. Press the Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. Advanced Adaptive Luma Press the button to highlight Advanced Adaptive Luma.
VIZIO VO32L FHDTV10A User Manual Reset Picture Mode Press the button to highlight the option for Reset Picture Mode selection button to return on Picture settings to Press factory default. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. Note: Only settings under the pictures adjustment tab will be reset. DTV / TV Input Audio Adjustment Audio Mode When the button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page. Press the page.
VIZIO VO32L FHDTV10A User Manual Equalizer Press the button to highlight the Equalizer selection. Press the button to start adjusting A new menu will be displayed showing volumes of different frequencies (pitches). Starting from lowest to the highest pitch, they are 120 Hz, 500Hz, 1.5 kHz, 5 kHz and 10 kHz. button to highlight the frequency you Press the wish to adjust. or button to adjust for boost or Use the attenuation.
VIZIO VO32L FHDTV10A User Manual Digital Audio Out Press the button to highlight the Digital Audio Out selection. or button to make the proper selection. The options are OFF, Dolby Digital and PCM. Press the Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. Speakers Press the button to highlight the Speakers selection. or button to turn the internal speakers On or Off.
VIZIO VO32L FHDTV10A User Manual Reset Audio Mode Press the button to highlight the option for Reset Audio Mode selection button to return on Audio settings to Press factory default. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. Note: Only settings under the audio adjustment tab will be reset. DTV / TV Tuner Setup When you first used your HDTV you will have setup your TV for DTV / TV channels using the Initial Setup screens.
VIZIO VO32L FHDTV10A User Manual Partial Channel Search If you believe channels are missed from the auto search, you can do a partial channel search to look for channel in a certain channel range again. button to highlight the Partial Press the Channel Search selection. Press the button to enter the submenu. button to select scan mode to look Press the for Analog, Digital, or both Analog/Digital channels. button to highlight the “To” and Press the “From” selection.
VIZIO VO32L FHDTV10A User Manual Daylight Saving As for Time Zone, setting the daylight saving time for your area will ensure that the correct program times are shown after pressing the GUIDE button on the remote control. Press the button to highlight the Daylight Saving selection. or button to select On or Off. Press the Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.
VIZIO VO32L FHDTV10A User Manual PIP Input When PIP or POP is selected, Press the button to highlight the PIP input selection. or button to choose the input source for the sub screen. The input sources available will Press the vary according to which input is used for the main screen; see the table below to find which inputs can PIP/POP with each other. See below for detailed information regarding the PIP sources.
VIZIO VO32L FHDTV10A User Manual Sleep Timer Press the selection. button to highlight the Sleep Timer button to select the timer to turn-off Press the the TV in 30, 60, 90 or 120 minutes. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. Wide The Wide option is the feature which allows you to select how your display would be size wise. When in TV mode; the selections are Normal, Wide, Stretch and Panoramic views.
VIZIO VO32L FHDTV10A User Manual Input Naming This feature has been added to facilitate you, the user in identifying or label the input and signal which is being watched. You could use up to 8 characters; either letters or numbers or combinations of both. Press button to highlight this option. Press button to obtain the next screen which shows the different inputs. button to select the desired input which you want to label or name (Examples: VCR, DVD,.., Press etc.
VIZIO VO32L FHDTV10A User Manual CC (Closed Caption) Press the button to highlight the CC (Closed Caption) selection. button. A separate menu will appear Press the with the following CC settings CC When watching regular analog (NTSC) TV, the CC feature is available in the Setup menu. Press the button to highlight the CC selection. button to select CC1, CC2, CC3 or Press the CC4. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.
VIZIO VO32L FHDTV10A User Manual H/V Position Press the selection. button to highlight the H/V Position button. A separate menu will appear Press the with the following H/V Position settings H-Position Press the button to highlight the Horizontal Shift selection. button to start adjusting the Press the horizontal position of the picture. or button to adjust the horizontal Use the position. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.
VIZIO VO32L FHDTV10A User Manual DTV / TV Input Parental Control If you want to restrict certain channel and program viewing, you can do this by turning on the Parental Control. Selected programs, movies and channels can then be made available only after an authorized password has been entered and accepted by the TV. When the button is pressed, the On Screen Display (OSD) appears on the PICTURE adjustment page. Press the button to display the SETUP page.
VIZIO VO32L FHDTV10A User Manual Channel Block button to highlight the Channel Press the Block selection. Press the button to go to the next screen. button to highlight the channel you Press the want to block. Press the button to block the highlighted channel. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.
VIZIO VO32L FHDTV10A User Manual US Movie Rating (For US) Press the button to highlight the US Movie Rating selection. button and the Block Movie Rating Press the panel will be displayed.
VIZIO VO32L FHDTV10A User Manual Canadian French Rating Press the button to highlight the Canadian French Rating selection. button and the Block Canadian Press the French Rating panel will be displayed.
VIZIO VO32L FHDTV10A User Manual Blocked Unrated Programming Follow the procedure in the previous section 0 to display the Parental Control menu and then press the button to highlight the Block Unrated TV selection. button to turn-on or turn-off the Press the blocking of programming that does not have a rating. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. Change the Password button to highlight the Access Code Press the Edit selection.
VIZIO VO32L FHDTV10A User Manual System Reset Press the button to highlight System Reset. Press the button. A new menu will appear. Setup Wizard Use this function to return to the Initial Setup when the TV was used for the first time. Use this function if you wish to have a guided setup when you relocate your TV. Please refer to Basic LCD HDTV Start Up on page 32 for more information. Note: Previously scanned removed.
VIZIO VO32L FHDTV10A User Manual HDMI Input Audio Adjustment The Audio Adjust menu operates in the same way for the HDMI Input as for the DTV / TV input in section 0. HDMI Input Setup The Setup menu operates in the same way for the HDMI Input as for the TV input in section 0. The menu difference is that there is no DTV / TV or Parental Control adjustments.
VIZIO VO32L FHDTV10A User Manual Video Input Audio Adjustment The Audio Adjust menu operates in the same way for Video Inputs (Component and AV) as for the DTV / TV input in section 0. The menu difference is that there is no icon along the top for DTV / TV adjustments. Video Input Setup The Setup menu operates in a similar way for Video Inputs (Component and AV) as for the TV input in section 0.
VIZIO VO32L FHDTV10A User Manual Video Input Parental Control The Parental Control menu operates in the same way for Video Inputs (Component and AV) as for the DTV / TV input in section 0. The menu difference is that there is no icon along the top for DTV / TV adjustments. PC Input Picture Adjustment The Picture Adjust menu operates in the same way for the PC Input as for the DTV / TV input in section 0 for Backlight, Contrast, Brightness and Color Temperature.
VIZIO VO32L FHDTV10A User Manual Brightness Press the button to highlight the Brightness selection. button to start adjusting the brightness and the menu page will disappear and be replaced Press the by a small Brightness Indicator Bar so you can see the brightness level between the minimum and maximum available levels. Use the or button to adjust the level. The Brightness adjusts the black levels in the picture.
VIZIO VO32L FHDTV10A User Manual Color Temperature button to highlight the option for Color Press the Temperature selection. The default is the 9300K (Cool) setting. or button if you want to choose Press the the 9300, 6500 or Custom option. Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. If you choose the Custom option, then a new menu will be displayed showing the primary color items, Red, Green and Blue.
VIZIO VO32L FHDTV10A User Manual H-SIZE Press the button to highlight the H-Size selection. Press the button to start adjusting the horizontal size of the picture. or button to adjust the horizontal size. Use the Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely. H-Position Press the button to highlight the Horizontal Shift selection. button to start adjusting the Press the horizontal position of the picture.
VIZIO VO32L FHDTV10A User Manual PC Input Audio Adjustment The Audio Adjust menu operates in the same way for the PC Input as for the DTV / TV input in section 0. The menu difference is that there are no icons along the top for DTV / TV and Parental Control adjustments. PC Input Setup The Setup menu operates in the same way for the PC Input as for the DTV / TV input in section 0. The menu difference is that there is no icon along the top for TV adjustments and no Closed Caption.
VIZIO VO32L FHDTV10A User Manual Understanding Viewing Features Your HDTV features the following viewing modes. You can switch viewing modes using the remote control, please follow the instructions in page 39. Viewing Modes Normal Mode The original 4:3 aspect ratio (1.33:1 source) is preserved, so black bars are added to the left and right of the display image. Standard TV broadcasts are displayed with a 4:3 Aspect Ratio. Movies in 4:3 Aspect Ratio may be referred to as pan-and-scan or full frame.
VIZIO VO32L FHDTV10A User Manual Chapter 5 Maintenance and Troubleshooting Maintenance Important 1. 2. Make sure that the power cable is removed from the socket before cleaning the TV. Do not use volatile solvent (such as toluene, rosin and alcohol) to clean the TV. Such chemicals may damage the housing, screen glass and remote control, and cause paint to peel. Cleaning the Housing and Remote Control 1. 2. Use a soft cloth for cleaning.
VIZIO VO32L FHDTV10A User Manual Troubleshooting Guide If the TV fails or the performance changes dramatically, check the display in accordance with the following instructions. Remember to check the peripherals to pinpoint the source of the failure. If the display still fails to perform as expected, contact the VIZIO for assistance by calling 1-877-MYVIZIO (6984946) or e-mail us at techsupport@vizio.com. Problem Solution No power. Make sure the power button is ON (White VIZIO Logo).
VIZIO VO32L FHDTV10A User Manual Problem Solution The display image does not cover the entire screen. If you are using RGB mode, make sure that H Size and V Position in the On Screen Display (OSD) are set correctly. If you are using TV, AV-C (Composite), AV-S (S-Video) or Component with 480i input, follow instructions in page 53 to obtain the desired screen mode. You can see a picture but you cannot hear sound. Make sure that the volume is not turned down. Make sure that the sound is not muted.
VIZIO VO32L FHDTV10A User Manual Telephone & Technical Support Products are often returned due to a technical problem rather than a defective product that may result in unnecessary shipping charges billed to you. Our trained support personnel can often resolve the problem over the phone. For more information on warranty service or repair, after the warranty period, please contact our Support Department at the number below.
VIZIO VO32L FHDTV10A User Manual Compliance Caution: Always use a power cable that is properly grounded. Please use the AC cords listed below for each area. USA Canada Germany UK Japan UL CSA VDE BASE/BS Electric Appliance Control Act FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
VIZIO VO32L FHDTV10A User Manual Chapter 6 Miscellaneous Information Specifications Specifications Panel 32” Diagonal, 16:9 Aspect Ratio Resolution 1920 x 1080 pixels Pixel (Dot) Pitch 0.36375(H) x 0.36375(V) Display Compatibility FHDTV (1080P) Colors 16.7 Million Brightness cd/m2 (typical) 480nits Contrast 1300:1 Contrast Ratio with DCR 6500:1 Response Time 6.
VIZIO VO32L FHDTV10A User Manual Dimensions 31.57"W x 22.38"H x 8.58"D with stand; 31.57"W x 21.13"H x 4.13"D without stand Net Weight 26 lbs without stand, 27.56 lbs with stand Gross Weight 36.6 lbs Certifications CSA C/US, FCC Class B, BETS-7 *Product specifications may change without notice or obligation. Glossary – Standard Definitions Analog TV: Today’s TV system using radio frequency waves to transmit and display pictures and sound.
VIZIO VO32L FHDTV10A User Manual Limited Product Warranty VIZIO provides a “ONE-YEAR LIMITED WARRANTY” against manufacturing defects in materials and workmanship to the original purchaser of a new VIZIO display purchased from an authorized VIZIO U.S. reseller and used in the fifty (50) United States or Puerto Rico. VIZIO's Responsibility VIZIO displays purchased new from an authorized VIZIO U.S.
VIZIO VO32L FHDTV10A User Manual limited warranty. Installation, removal, transportation and reinstallation of a display, and routine maintenance and cleaning, are not covered by this limited warranty. THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE.
VIZIO VO32L FHDTV10A User Manual determination for performing the on-site repair may be dependent upon the manufacturing defect and is at VIZIO's option and sole discretion. Proof of purchase is required to confirm the product is within the oneyear limited warranty period and meets the terms and conditions of the VIZIO Limited Product Warranty. On-site repair service is requested through VIZIO's third-party service provider.
VIZIO VO32L FHDTV10A User Manual Index A Accessories, 6 Adjustments Selecting the Screen Size, 70, 77 Stepping through TV Channels, 39 Volume, 11, 39, 72 Advanced Video Features Black Level Extender, 45 Color Temperature (Color Temperature, 45 CTI (Color Transient Improvement, 45 DNR (Dynamic Noise Reduction, 44 Flesh Tone, 45 C Cleaning your VIZIO TV, 71 Coax (RF) Connecting for DTV, 18 Connecting your Basic Set Top Box, 22 Component Connecting your DVD Player, 25 Connecting your HDTV Set-Top Box, 21 Com
P Parental Control Block Unrated Programming, 61 Canadian English Rating, 59 Canadian French Rating, 60 Channel Block, 58 DTV Rating, 60 Movie Rating, 59 Password change, 61 Rating Enable, 57 TV Rating, 58 PC Input Audio Adjustment, 69 Auto Adjust, 65 Picture Adjustment, 65 Setup, 69 PC Picture Adjust Fine Tune, 68 H/V Position, 56 Horizontal Position, 56, 68 Horizontal Size, 56, 68 Vertical Position, 56, 68 R Remote, 14 Batteries, 16 Range, 16 Remote:, 16 RGB Connecting your PC, 30 S safety instructions,
