Specifications

Accessories
page | 111
Buffer Tablets (Box of 100 Tablets) – For Use with Testers Only
These buffer tablets are perfect for small volumes of pH buffers needed for calibration of pocket pH
testers. Simply dissolve a tablet in 30 ml of fresh distilled water; calibrates up to ±0.1 pH accuracy.
Order Code Part No. Description
pH Buer Tablets (10 Strips x 10 Tablets Per Box)
ECBU4BX 01X038201 pH 4 buffer tablets
ECBU7BX 01X038202 pH 7 buffer tablets
ECBU10BX 01X038203 pH 10 buffer tablets
Calibration Sachets (20 x 20 ml Per Box)
Economical NIST-traceable sachets for quick, accurate and convenient calibrations. Simply insert
electrode into sachet pack, calibrate, rinse and discard sachet – no separate container needed!
Order Code Part No. Description
pH Buer Sachets (20 x 20 ml Per Box)
ECBU4BS 01X223102 pH 4.01 buffer sachets (NIST traceable)
ECBU7BS 01X223101 pH 7.00 buffer sachets (NIST traceable)
ECBU10BS 01X223103 pH 10.01 buffer sachets (NIST traceable)
ECRINWT 01X223201 pH deionized water rinse sachets (NIST traceable)
Conductivity/Salinity Sachets (20 x 20 ml Per Box)
ECCON10BS 01X219905 10 µS/cm KCl Conductivity sachets
ECCON447BS 01X219902 447 µS/cm KCl Conductivity sachets
ECCON1413BS 01X219901 1413 µS/cm KCl Conductivity sachets
ECCON2764BS 01X219903 2764 µS/cm KCl Conductivity sachets
ECCON15000BS 01X219904 15000 µS/cm KCl Conductivity sachets
ECCON3000BS 01X219906 3000 ppm KCl Salinity calibration sachets
Precision pH/mV Simulator
The Eutech pH-millivolt simulator is a handy, easy-to-use service tool for testing the accuracy of your
pH meter. Used for trouble-shooting and fault diagnosis of meters, the simulator works with most
pH/redox instruments with BNC connectors. Simulator comes with a BNC cable and a sturdy rubber
boot which doubles up as a stand.
• PushbuttonpH/mVselection • LargedisplaywithbrightLED
• pHaccuracyof±0.05;mVrangeof±2 • Splashproofkeypad
• USA/NISTpHbufferstandardssimulation • Protectiverubberbootdoublesupasstand
• 16combinationvalues • Power-savingmeterrunson4‘AAA’x1.4Vbatteries
• 1GΩhighinputimpedancetest
Order Code Part No. Description
ECPHSIMULATOR 01X373301
Precision hi-low impedence and multiple buffer pH simulator
(includes 60X030128 BNC-BNC cable)
Electrode Stand with Swivel Arm
Electrode stand with swivel arm allows convenient hands-free operation. Holds up to four standard size
electrodes and one ATC probe.
• Weighted6-inchdiameterbaseallowsyoutopivotholder360°formoreflexibility
• Armallowsyoutomoveelectrodesidetosideorupanddownwhilekeepingelectrodeata
constant verticle angle
Order Code Part No. Description
ECPHELSTDC 01X081600 Free standing electrode stand with swivel arm
01X321801 01X321801 Electrode arm and bracket for CyberScan 6000 , 700 and 2700 series meters
Accessories