Specifications

to order – contact official stockists www.bearmach.com
accessories
35
DEFENDER
LAND ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
REAR WINCH
BUMPER
Rugged construction
with chequer plate steps.
Integral jacking points
and recovery eyes.
Utilises 16 existing
mounting points giving
tremendous strength and
heavy duty rear
protection. Suits Safari
rear door and tailgate types and will accept most low-profiles winches (with
10" x 5" stud pattern).
Cross member modification maybe necessary on some vehicles. This model is
not suitable for towing.
Winch, fairlead and shackles shown in photograph are not included.
BA 3125 – Rear Winch Bumper – Def 90 up to 98
BA 3126 – Rear Winch Bumper – Def 90 from 98 on
WINCHING EQUIPMENT
For the serious off-roader a winch can be an essential
part of the kit. Bearmach stocks a wide range of
winching accessories with winch plates to suit most
models and fitments.
See our range of Winches and Accessories
in the 4x4 ESSENTIALS section.
BA 3125
SUPERWINCH X6
WINCH KIT
BA 025 – 6,000 lb winch
to suit Defender. Including
bumper, roller fairlead and
cable.
SUPERWINCH X9
WINCH KIT
BA 3093A – 9,000 lb
winch to suit Defender.
Including bumper, roller
fairlead and cable
SUPERWINCH HUSKY WINCH
BA 3095 – 8,000 lb winch for Defender. Includes bumper mount, fairlead
and all fittings.
WINCH PLATE
Chassis mounted winch plate to suit Defender, will take 6,000 or 8,000lb
Warn winches. Mounts on top of bumper. Will not fit with air-con.
BA 2028 – Defender chassis mounted winch plate
BA 2030 – Defender chassis mounted winch plate to suit BA35/36
BA 2028A – Defender chassis mounted winch plate to suit T-Max winches
11,000 and 12,000
BA 2028
‘A’ FRAME FOR WINCH BUMPER
2" Tubular Steel ‘A’ frame which bolts directly on to BA 3093B shown above.
BA 3093C – ‘A’ frame, Black Nylon Coating
BULL BAR FOR
WINCH BUMPER
2" Tubular Steel Bull Bar
which bolts directly on to
BA 3093B shown above.
BA 3093D – Bull Bar,
Black Nylon Coating
BA 3093D
BA 3093C
BA 3093G
WINCH BUMPER
Winch frame and integral bumper. Replaces directly the existing bumper and
allows fitting of the following winches:
Warn 6000 “M” and “MX” series Superwinch X6 CD
Warn 8000 “M” and “MX” series Superwinch X9
Warn XD9000 T-Max
Available Black Powder coated or Galvanised finish . No drilling or any
modifications required. Incorporating jacking points. Made from 6mm steel
plate. Will also fit air conditioned vehicles – please confirm vehicle type when
ordering. Please specify if Black or galvanised required.
BA 3093B – Winch Bumper, Black Powder Coated
BA 3093E – Winch Bumper, Black Powder Coated (non A/C vehicles)
BA 3093G – Winch Bumper, Galvanised
BA 3093F – Winch Bumper, Galvanised (non A/C vehicles)
BA 3193 – Winch Bumper Black Powder Coated. To suit Self Recovery
Winches BA 035/036 (see page 106).
The following items can also be added to the Winch Bumper:
SEE PAGE
S
127 - 131
FOR
OU
R
FU
LL
R
AN
GE OF
WINCHES
winching equipment