Specifications

www.bearmach.com to order – contact official stockists
accessories
68
D ISCOVERY
LAND ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
POLYURETHANE
BUSH KITS
The fitment of Bearmach
Polyurethane Bushes has been
developed to give more positive
location at pivot or fulcrum points.
These suspension components are
particularly recommended if you
regularly tow or carry heavy loads.
Polyurethane Bushes have been taking over the automotive suspension
industry. The urethane elastomers used have the versatility and elasticity of
rubber yet with the advantages of rigid plastics and metals.
These bushes have a high capacity to bear tension and compression and have
been tested at temperatures from -100°C to +100°C. They are resistant to
deterioration and swelling caused by oil, grease or chemicals.
BA 2071 P-U BUSH KIT Disco from 1986-1999
BA 2075 P-U BUSH KIT Discovery 2 1999-2004
BR 0695P P-U BUSH Shock Absorber
BR 1083P P-U BUSH Shock Absorber
ANR1721P P-U BUSH Bottom Bush Rear Disco 94 on
BR 1754P P-U BUSH Top Bush Rear
Land Rover Equivalent:
BFM 236P P-U BUSH Bump Stop ANR4188
BFM 237P P-U BUSH Bump Stop ANR4189
BFM 237PE P-U BUSH Bump Stop suits front and rear
BR 0374P P-U BUSH D Bush NTC7394
BR 0388P P-U BUSH D Bush NTC6828
RBX101340P P-U BUSH Panhard Rod Bush for Disco 2
ALL BUSHES
AVAILABLE
SEPARATELY
DISLOCATION CONES
BA 3650 Front pair of Dislocation Cones
BA 3651 Rear pair of Dislocation Cones
BA 3652 Front Spring Retainer Plate (Each)
NTC 6106 Rear Spring Retainer Plate (Each)
CASTER BUSH KITS
Caster bushes allow the axles to remain
in their original positions when raising
the vehicle (i.e. prevents them twisting).
They fit into the radius arms to
minimise any stress on steering
components. Suitable for Defender, RR
Classic and Disco.
BSC 206PC – Caster Bush Kit
SUSPENSION MODS
Ref No Description Vehicle
BA 3655 Cranked Rear Trailing Arm Def/Disco/RR Classic 86 on
For use with suspension lifts. Includes rear polyurethane
bushes.
BA 3659 Laminate Chassis Plates Disco/RR Classic
Welded to existing chassis for increased strength.
The following Radius Arms are for improved off-road use. Available in
standard, 3° or 6° camber correction – for use with 4" lift kits. Bushes not
included
BA 3670 Front Radius Arm Std Wide Def/Disco/RR Classic
BA 3671 Front Radius Arm 3° Wide Def/Disco/RR Classic
BA 3672 Front Radius Arm 6° Wide Def/Disco/RR Classic
BA 3659
BA 3670
BA 3655
suspension
REAR SHOCK DROPPER
For lifted vehicles using standard
shock absorbers to gain extra axle
travel with minimum alterations.
BA 3656 Rear Shock
Dropper
REAR ROSE JOINTED
SUSPENSION ARM
For maximum axle articulation these rose jointed trailing arms are
the latest products. Supplied with boots for maximum protection
against mud and the elements. Will fit existing axle and chassis
without further modification.
BA 3676 Rear Rose Jointed Suspension arm
BA 3676
BA 3656