Specifications

to order – contact official stockists www.bearmach.com
accessories
9
S ERIES 2a &
3
LAND ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
O
FF ROAD PROTECTION
Although Land Rover Series vehicles were designed for
off-road use you ought to consider adding extra
protection to the vulnerable areas underneath the vehicle
as well as the bodywork. Bearmach make a variety of
items all manufactured to the highest standards and
tested to destruction to give you peace of mind when
tackling the roughest terrain.
DIFF GUARD
Easy to fit, applicable to
all models with standard
axles, Zinc plated for
corrosion resistance NO
DRILLING required.
BA 121 – Diff Guard
BA 121
PANEL PROTECTION.
Bearmach provide a range of aluminium checker plate to help protect the
panels and give extra strength to the vehicle. Available for the wing tops,
bonnet, sills and rear wings. These plates also enhance the vehicle's
appearance.
BA 113
REAR WING PROTECTOR
Made from 5 Bar aluminium plate,
these protect the lower part of the
rear wing from stone and gravel
damage. The ideal finishing touch,
and as fitted to Limited Edition
models.
BA 124A – Rear Wing protector for
Series 2a & 3 88"
BA 124A
WINGTOP STRENGTHENER / PROTECTOR
Made from sturdy 2mm aluminium 5 Bar plate, not only do these enhance
the appearance of your vehicle but also allow you to step on top of your wing
to gain access to the roof rack.
BA 113A Wingtop strengthener without vent hole, for Series 3.
BA 113C As BA 113A but in Black finish
BA 108 Wingtop strengthener. Shorter version coming up to the vent on
the Defender, and can be used to protect the wing top front half
on the Series 3
BA 108A As BA 108 but in Black finish
BA 113C
WADING KITS
BA 2169 – To suit Series 2, 2a
and 3. Consists of
breather pipes for
axles.
RAISED AIR INTAKES
Fitting a raised air intake and wading kit to your vehicle means cleaner air in
dusty conditions and improved wading ability in wet or flooded conditions.
Photograph shows similar product fitted to a Defender
BA 2128 – Mantec, Metal Raised Air Intake to suit Series 2 & 3
ROLL CAGES
Standard rollbar (Body mounted)
Bolted onto cappings. Manufactured
in tubular steel 2” (50mm) diameter
with 3.2mm wall thickness. MIG
welded with heavy mounting plates.
(Not A.R.C). Will also fit vehicle
with standard canvas hood.
BA 2005 – Standard Roll Cage
BA 2005
SILL GUARD
Made from 5 Bar aluminium plate, these protect the sill from scuffing while
entering or leaving the vehicle, as well as stone chips and light off-road
damage. The ideal finishing touch, and as fitted to Limited Edition models.
BA 126A SILL GUARD to suit Land Rover 88
BA 127A SILL GUARD to suit Land Rover 109
BA 126
off-road protection