Specifications

CLASSIC
www.bearmach.com to order – contact official stockists
accessories
104
R ANGE ROVER
LAND ROVER
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
BA 2157
ANTI ROLL BARS
Why not combine the heavy duty springs with our range of special suspension
components below.
BA 032 Anti Roll Bars, Front, to suit R/R
BA O34A Anti Roll Bars, Rear, to suit R/R
BA 032D Spare D Bush Front Set 2 pieces
BA 034D Spare D Bush Rear Set 2 pieces
BA 032L Spare Link Bush Set 8 pieces
These new twin shock absorber brackets will suit all coil sprung models. The
front unit consists of top bracket, to take the original shock absorber plus an
additional one, and the bottom bracket to support the additional shock
absorber.
The rear unit consists of top shock absorber brackets which bolt through the
chassis and bottom brackets which weld onto the axle case.
BA 2156 Single front Tubular Galvanised Shock Tower to suit Range
Rover Classic
BA 2157 Twin Shock Mount Front Range Rover Classic
BA 2162 Twin Shock Mount Rear Range Rover Classic
When fitting to ABS vehicles a certain amount of modification will be
required to move the ABS pump and pipes.
TWIN SHOCK
ABSORBER
BRACKETS
POLYURETHANE
BUSH KITS
The fitment of Bearmach
Polyurethane Bushes has
been developed to give
more positive location at
pivot or fulcrum points.
These suspension
components are
particularly
recommended if you
regularly tow or carry
heavy loads.
Polyurethane Bushes have been taking over the automotive suspension
industry. The urethane elastomers used have the versatility and elasticity of
rubber yet with the advantages of rigid plastics and metals.
These bushes have a high capacity to bear tension and compression and have
been tested at temperatures from -100°C to +100°C. They are resistant to
deterioration and swelling caused by oil, grease or chemicals.
BA 2070 P-U BUSH KIT Range Rover up to 1986
BA 2071 P-U BUSH KIT Range Rover 1994
BFM 237PE P-U BUSH Bump Stop suits front and rear
BR 0695P P-U BUSH Shock Absorber
BR 1083P P-U BUSH Shock Absorber
BA 2156
ALL BUSHES
AVAILABLE
SEPARATELY
BA 2220
CASTER BUSH KITS
Caster bushes allow the axles to remain
in their original positions when raising
the vehicle (i.e. prevents them twisting).
They fit into the radius arms to
minimise any stress on steering
components. Suitable for Defender, RR
Classic and Disco.
BSC 202PC – Caster Bush Kit RR
Classic up to 85
BSC 206PC – Caster Bush Kit RR
Classic from 85
Rear Anti Roll Bar
Rear Anti-Roll Bar replaces the original and yet is a more
heavy duty construction. Improves the handling of
your Range Rover Classic.
BA 2220 – Replacement Rear Anti-Roll Bar (Heavy Duty)
suspension