Specifications

to order – contact official stockists www.bearmach.com
accessories
135
G IFTS && ESSENTIALS
BEARMACH OFF-ROAD
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
SPARE WHEEL MOUNTED BIKE RACK
Unique quick release arms clamp on to the spare wheel mounted on the rear
door of any 4x4 vehicle. Can be adjusted for right, left or centre mounted
tyre mounts and fits most sizes of spare tyre. Includes number plate holder
and security straps. Allows two bikes to be carried safely and securely.
BA 3080 – Spare Wheel Mounted Bike Rack
BA 3080
BA 193
BA 195
UNIVERSAL
TOW BAR
WIRING KIT
BA 195 – Universal
wiring kit with audible
warning
BA 195A – Universal
Towing Bypass Relay.
Note: Each Land Rover also has a specific O.E.M. wiring kit
available – please see the relevant section.
TOWBALLS
BA 191 – Universal Coupling*
Towing capacity 3.5 tonne. 50mm Ball, with 25mm (nominal) dia forged pin,
(to suit towing eyes: minimum I.D. 28.6mm maximum section 28.6mm). 2
bolt fixing. Zinc plated finish.
BA 193 – 50mm Towball*.
3500kgs Capacity, 2 hole fixing. Zinc plated finish.
* = E Marked
BA 191
SLIDETITE TIE-DOWN SYSTEM
When we saw these products we thought – here’s the solution for hundreds of
tie-down problems when you’re out and about in your Land Rover.
SlideTite™ products are based around a simple, patent pending, locking
mechanism. The mechanism is both quick and very strong. The harder it is
pulled the tighter it locks, but never jams shut. It works in all conditions -
wet or dry - hot or cold.
The hook has been tested to hold 50Kg without breaking and the SlideTite™
mechanism itself to over 100Kg.
The system includes:
1: Get some bungee
cord or rope and any
SlideTite™ product.
2: Push the bungee or
rope up through the
hole in the bottom.
3: Pull back the
bungee or rope down
into the slot to lock it
in place.
4. To unlock: ... simply
pull the rope or bungee
up out of the slot
1
2
3
4
HOW IT WORKS
BA 2950 – The Hook
BA 2951 – The Plate
BA 2952 – The Binder
BA 2955 – 2m length of Bungee (colour can vary)
BA 2956 – 3m length of Bungee (colour can vary)
BA 2957 – 5m length of Bungee (colour can vary)
BA 2960 - Kit 1 - 2x3m bungee 4 x hooks
BA 2961 - Kit 2 - 2x2m bungee, 1x3m bungee 4x hooks, 4x plates, 2x binders.
The Hook: A large,
strong 25mm hook for
use in most situations
where you can grab
onto an existing anchor
point.
The Plate: Provides a
permanent anchor
point. Screw or glue
the plate to any surface
to hold stuff in place.
The Binder: Two
SlideTite™ devices
back to back. For use
wherever you need to
wrap rope / bungee
around anything.
towing equipment