Specifications

TC3500 Operation Instructions 3. Advanced Procedures • 49
Never exceed 80 psi to seat beads. If not seated, all pressure MUST be
exhausted remotely before approaching tire in cage. Remove, inspect, and
relubricate if beads do not seat.
After beads seat, deflate tire using the remote device. Install valve core and re-inflate
to specification inflation pressure using remote device. Remove tire/wheel assembly
from cage.
Demounting Run-Flat with Band Type Sensor
Inspect the wheel for safe serviceability and identify the type of TMS sensor. A Run-
Flat/EMT tire with a rubber valve stem usually indicates that the TMS is a band type
sensor.