Specifications

30 • 3. Advanced Procedures TC3500 Operation Instructions
Rotate the wheel clockwise until the upper bead of the tire is completely installed.
To prevent rim from spinning inside the tire, grasp tire at location shown below and
pull tire along with rim during rotation.
Remove Bead Depressor “Tail” from rim.
Removal of Bead Depressor “Tail”
CAUTION: Never forcefully pull bead depressor “tail” out of tire after
installation to avoid damage to tool and/or rim.
With the upper roller depressing the sidewall of the tire, rotate the wheel
counterclockwise.
Pull the ball knob at the end of the attached blocks as each attached block
approaches the upper bead roller.