Installation guide

103666_EBH_Rev1.0_080215
MPE 750 Turbo Marine
Closed Loop
Installation Guide
Page 24
8 Maintenance
Activity Procedure see page
1st
mainte-
nance
h
1)
Maintenance interval
h
1)
At end of season after 25 every 50 every 100
Motor oil and oil
fi lter
Change 14 ■
2)
■
2)
■
Coolant Change 20 ■ every 4 years
4)
Spark plugs
Check /
clean
23 ■
Change 23 ■
3)
Valve play
Check /
set
26 ■
3)
■
3)
Fuel fi lter Change 32 ■
3)
Following table shows the maintenance intervals for the marine engine.
1)
h = hours of operation
2)
or at least once a year if the hours of operation specifi ed above are not reached before
that.
3)
or at least every two years if the hours of operation specifi ed above are not reached
before that.
4)
Valid for engine manufacturer’s fi ll. Please note the instructions provided by coolant
manufacturer, when using other coolants.
For detailed maintenance informations please consult the service handbook.
This handbook can be downloaded in the service section at:
www.weber-motor.com