User manual

USER MANUAL OF WEBEE WIRELESS N ROUTER Version:1.1

Firmware Type 2

P/N: 60291092

RS (Reset) Push continually the reset button 5 ~ 10 seconds to reset the

configuration parameters to factory defaults.

2.6. HARDWARE REQUIREMENTS FOR WI-FI CONNECTIVITY

To use the Webee Router in a wireless local area network you will need:

1) Computer with an Ethernet interface

2) Ethernet Network Cable (RJ-45) (included in the package) to connect the router to a

WAN interface. You may also use the network cable to connect the router to your

computer during the installation.

3) Wireless Network Adapter if you wish to wirelessly connect your computer to the

router