User manual

USER MANUAL OF WEBEE WIRELESS N ROUTER Version:1.1
Firmware Type 2
P/N: 60291092
60
4.3.23 Route Setup
This page is used to edit static route entry and disable NAT.
Item Description
Enable Static Route Click to Enable the Static Route function
IP Address
Subnet Mask
Default Gateway
Manually Specify the packets arrive at the destination. The internal
network can be avoided through the Internet of the packet exchange.
Apply Changes Click the Apply Changes button to complete the new configuration
setting.
Reset Click the Reset button to abort change and recover the previous
configuration setting.
Show Route Table Click button to show route table
Delete All Click to delete all the registered entries from static route table list..
Delete Select Click to delete the selected rout table that will be removed from the static
route table list.
Reset Click the Reset button to abort change and recover the previous
configuration setting.