User manual

USER MANUAL OF WEBEE WIRELESS N ROUTER Version:1.1
Firmware Type 2
P/N: 60291092
55
Item Description
Enable Port Forwarding Click to enable the Port Forwarding security function.
IP Address
Protocol
Port Range
Comment
To forward data packets coming from WAN to a specific IP address
that hosted in local network behind the NAT firewall, fill in the IP
address, protocol, port range and your comments.
The Protocol can be TCP, UDP or Both.
The Port Range for data transmission.
Comments let you know about whys to allow data packets forward to
the IP address and port number.
Apply Changes Click the Apply Changes button to register the IP address and port
number to Port forwarding list.
Reset Click the Reset button to abort change and recover the previous
configuration setting.
Delete Selected Click to delete the selected IP address and port number that will be
removed from the port-forwarding list.
Delete All Click to delete all the registered entries from the port-forwarding list.
Reset Click the Reset button to abort change and recover the previous
configuration setting.