User manual

USER MANUAL OF WEBEE WIRELESS N ROUTER Version:1.1

Firmware Type 2

P/N: 60291092

Item Description

Enable IP Filtering Click to enable the IP filtering security function.

Local IP Address

Protocol

Comments

To restrict data transmission from local network on certain IP addresses,

fill in the IP address and the protocol, also put your comments on it.

The Protocol can be TCP, UDP or Both.

Comments let you know about whys to restrict data from the IP address.

Apply Changes Click the Apply Changes button to register the IP address to IP filtering

list.

Reset Click the Reset button to abort change and recover the previous

configuration setting.

Delete Selected Click to delete the selected IP address that will be removed from the IP-

filtering list.

Delete All Click to delete all the registered entries from the IP-filtering list.

Reset Click the Reset button to abort change and recover the previous

configuration setting.

4.3.17 Firewall - MAC Filtering

Entries in this table are used to restrict certain types of data packets from your local

network to Internet through the Gateway. Use of such filters can be helpful in securing or

restricting your local network.