User manual

USER MANUAL OF WEBEE WIRELESS N ROUTER Version:1.1

Firmware Type 2

P/N: 60291092

subnet mask for it.

Gateway If you select the Static L2TP support on WAN interface, fill in

the gateway for WAN interface out going data packets.

Server IP Address Enter the IP address of the L2TP Server.

User Name If you select the L2TP support on WAN interface, fill in the

user name and password to login the L2TP server.

Password f you select the L2TP support on WAN interface, fill in the

user name and password to login the L2TP server.

MTU Size Fill in the mtu size of MTU Size. The default value is 1460.

Refer to 4.23 What is Maximum Transmission Unit (MTU)

Size?

Attain DNS Automatically Click to select getting DNS address for L2TP support.

Please select Set DNS Manually if the L2TP support is

selected.

Set DNS Manually Click to select getting DNS address for L2TP support.

DNS 1 Fill in the IP address of Domain Name Server 1.

DNS 2 Fill in the IP address of Domain Name Server 2.

DNS 3 Fill in the IP address of Domain Name Server 3.

Clone MAC Address Fill in the MAC address that is the MAC address to be

cloned. Refer to 4.24 What is Clone MAC Address?

Enable uPNP Click the checkbox to enable uPNP function.

Refer to 4.22 What is Universal Plug and Play (uPNP)?

Enable IGMP Proxy Click the checkbox to enable IGMP Proxy.

Enable Ping Access on WAN Click the checkbox to enable WAN ICMP response.

Enable Web Server Access on

WAN

Click the checkbox to enable web configuration from WAN

side.

Enable FTP Server Access on WAN Click the checkbox to enable FTP Server Access on WAN

Enable IPsec pass through on VPN

connection

Click the checkbox to enable IPSec packet pass through

Enable PPTP pass through on VPN

connection

Click the checkbox to enable PPTP packet pass through

Enable L2TP pass through on VPN

connection

Click the checkbox to enable L2TP packet pass through

Apply Changes Click the Apply Changes button to complete the new

configuration setting.

Reset Click the Reset button to abort change and recover the

previous configuration setting.