User manual

USER MANUAL OF WEBEE WIRELESS N ROUTER Version:1.1
Firmware Type 2
P/N: 60291092
47
PPTP Allow user to make a tunnel with remote site directly to
secure the data transmission among the connection. User
can use embedded PPTP client supported by this router to
make a VPN connection.
Enable Dynamic Mode Click to select PPTP Dynamic support on WAN interface for
IP address assigned automatically from a PPTP server.
IP Address If you select the PPTP support on WAN interface, fill in the
IP address for it.
Subnet Mask If you select the PPTP support on WAN interface, fill in the
subnet mask for it.
Gateway If you select the Static PPTP support on WAN interface, fill in
the gateway for WAN interface out going data packets.
Server IP Address Enter the IP address of the PPTP Server.
Server Domain Name Assign Domain Name and dispatch to PPTP servers. It is
optional field.
User Name If you select the PPTP support on WAN interface, fill in the
user name and password to login the PPTP server.
Password f you select the PPTP support on WAN interface, fill in the
user name and password to login the PPTP server.
MTU Size Fill in the mtu size of MTU Size. The default value is 1460.
Refer to 4.23 What is Maximum Transmission Unit (MTU)
Size?
Request MPPE Encryption Click the checkbox to enable request MPPE encryption.
Attain DNS Automatically Click to select getting DNS address for PPTP support.
Please select Set DNS Manually if the PPTP support is
selected.
Set DNS Manually Click to select getting DNS address for PPTP support.
DNS 1 Fill in the IP address of Domain Name Server 1.
DNS 2 Fill in the IP address of Domain Name Server 2.
DNS 3 Fill in the IP address of Domain Name Server 3.
Clone MAC Address Fill in the MAC address that is the MAC address to be
cloned. Refer to 4.24 What is Clone MAC Address?
Enable uPNP Click the checkbox to enable uPNP function.
Refer to 4.22 What is Universal Plug and Play (uPNP)?
Enable IGMP Proxy Click the checkbox to enable IGMP Proxy.
Enable Ping Access on WAN Click the checkbox to enable WAN ICMP response.
Enable Web Server Access on
WAN
Click the checkbox to enable web configuration from WAN
side.
Enable FTP Server Access on WAN Click the checkbox to enable FTP Server Access on WAN
Enable IPsec pass through on VPN
connection
Click the checkbox to enable IPSec packet pass through
Enable PPTP pass through on VPN
connection
Click the checkbox to enable PPTP packet pass through
Enable L2TP pass through on VPN
connection
Click the checkbox to enable L2TP packet pass through
Apply Changes Click the Apply Changes button to complete the new
configuration setting.
Reset Click the Reset button to abort change and recover the
previous configuration setting.