User manual

USER MANUAL OF WEBEE WIRELESS N ROUTER Version:1.1
Firmware Type 2
P/N: 60291092
31
Item Description
Enable Mesh Click Checkbox to enable wireless Mesh function
Mesh ID It is the wireless Mesh name. The SSID can be 32 bytes long.
Encryption Select the encryption supported over wireless access. The
encryption method can be None or WPA2(AES)
Pre-Shared Key Formate Select the Pre-shared key format from the pull-down menu. The
format can be Passphrase or Hex (64 characters).
Pre-Shared Key Fill in the key value.
Apply Changes Click the Apply Changes button to register the AP to new
configuration setting.
Reset Click the Reset button to abort change and recover the previous
configuration setting.
Set Access Control It is only used for advanced users to setup the access control
rules of MPs. When
click the “Set Access Control” button, the “Access Control List
for Mesh Network”
page is presented.
Show Advanced Information Advanced users could click the “Show Advanced Information”
button to access the
“Wireless Mesh Network Information” page for detailed
information of current mesh
network.
Access Control List for Mesh Network
If you choose ‘Allowed Listed’, only those mesh nodes whose wireless MAC addresses
are in the access control list will be able to connect to Mesh network. When ‘Deny Listed’
is selected, those mesh nodes in thelist will not be able to create connections.