User manual

USER MANUAL OF WEBEE WIRELESS N ROUTER Version:1.1

Firmware Type 2

P/N: 60291092

Item Description

Enable WDS Click the check box to enable wireless distribution system. Refer to

4.21 What is Wireless Distribution System (WDS)?

MAC Address Fill in the MAC address of AP to register the wireless distribution

system access capability.

Data Rate Select the transmission data rate from pull-down menu. Data rate can

be auto-select, 1M to 54Mbps or MCS.

Comment Fill in the comment tag for the registered AP.

Apply Changes Click the Apply Changes button to register the AP to new

configuration setting.

Reset Click the Reset button to abort change and recover the previous

configuration setting.

Set Security Click button to configure wireless security like WEP(64bits),

WEP(128bits), WPA(TKIP), WPA2(AES) or None

Show Statistics It shows the TX, RX packets, rate statistics

Delete Selected Click to delete the selected clients that will be removed from the

wireless distribution system.

Delete All Click to delete all the registered APs from the wireless distribution

system allowed list.

Reset Click the Reset button to abort change and recover the previous

configuration setting.

WDS Security Setup

Requirement: Set [Wireless]->[Basic Settings]->[Mode]-

>AP+WDS

This page is used to configure the wireless security between APs. Refer to 3.3.6

Wireless Security Setup.