User manual

USER MANUAL OF WEBEE WIRELESS N ROUTER Version:1.1
Firmware Type 2
P/N: 60291092
27
Item Description
Wireless Access Control
Mode
Click the Disabled, Allow Listed or Deny Listed of drop down
menu choose wireless access control mode.
This is a security control function; only those clients registered in
the access control list can link to this Webee Router.
MAC Address Fill in the MAC address of client to register this Webee Router
access capability.
Comment Fill in the comment tag for the registered client.
Apply Changes Click the Apply Changes button to register the client to new
configuration setting.
Reset Click the Reset button to abort change and recover the previous
configuration setting.
Current Access Control List It shows the registered clients that are allowed to link to this
Webee Router.
Delete Selected Click to delete the selected clients that will be access right
removed from this Webee Router.
Delete All Click to delete all the registered clients from the access allowed
list.
Reset Click the Reset button to abort change and recover the previous
configuration setting.
4.3.8 WDS Settings
Wireless Distribution System uses wireless media to communicate with other APs, like
the Ethernet does. To do this, you must set these APs in the same channel and set MAC
address of other AP that you want to communicate with in the table and then enable the
WDS.