User manual

USER MANUAL OF WEBEE WIRELESS N ROUTER Version:1.1
Firmware Type 2
P/N: 60291092
24
and transmission-rate for each associated wireless client.
Enable Mac Clone (Single
Ethernet Client)
Take Laptop NIC MAC address as wireless client MAC address.
[Client Mode only]
Enable Universal Repeater
Mode
Click to enable Universal Repeater Mode
SSID of Extended Interface Assign SSID when enables Universal Repeater Mode.
Apply Changes Click the Apply Changes button to complete the new configuration
setting.
Reset Click the Reset button to abort change and recover the previous
configuration setting.
4.3.5 Wireless - Advanced Settings
These settings are only for more technically advanced users who have a sufficient
knowledge about wireless LAN. These settings should not be changed unless you know
what effect the changes will have on your Webee Router.
Item Description
Fragment Threshold Set the data packet fragmentation threshold, value can be written
between 256 and 2346 bytes.
Refer to 4.10 What is Fragment Threshold?
RTS Threshold Set the RTS Threshold, value can be written between 0 and 2347
bytes.
Refer to 4.11 What is RTS(Request To Send) Threshold?