User manual

USER MANUAL OF WEBEE WIRELESS N ROUTER Version:1.1

Firmware Type 2

P/N: 60291092

4.3.3 Operation Mode

This page is used to configure in which mode the Router acts

Item Description

Gateway Traditional gateway configuration. It always connects internet via

ADSL/Cable Modem. LAN interface, WAN interface, Wireless interface,

NAT and Firewall modules are applied to this mode

Bridge Each interface (LAN, WAN and Wireless) regards as bridge. NAT, Firewall

and all router’s functions are not supported

Wireless ISP Switch Wireless interface to WAN port and all Ethernet ports in bridge

mode. Wireless interface can do all router’s functions

Apply Changes Click the Apply Changes button to complete the new configuration

setting.

Reset Click the Reset button to abort change and recover the previous

configuration setting.

4.3.4 Wireless - Basic Settings

This page is used to configure the parameters for wireless LAN clients that may connect

to your Webee Router. Here you may change wireless encryption settings as well as

wireless network parameters.