Technical data

9 Repair

HL 90

906

CAUTION

Align interlock surfaces in rotor and on motor shaft.

WARNING

The 12 V type heater has only one glow plug resistor (18)

fitted. Make sure to close second opening in air intake

housing with a screw plug.

NOTE

Check fuel line position with gauge No. 866 45A by

positioning gauge on drive shaft of bypass fan and

reading the value 0.5 + 0.5. Bend as required to adjust

distance (see Figure).

30°

0.5 to 1

Fuel line

Gauge

(Ident. No.

866 45A)