Operation Manual

19
D
GB
NOTE:
In the 'heating' mode, the vehicle's heating system is to be set to "warm" prior
to leaving the vehicle.
In the 'heating' and 'ventilation' modes, the vehicle's fan switch is to be turned
to position 1 in the case of 3-speed blower fans, and to position 2 in the case of
4-speed blowers. In the case of infinitely variable fans adjust to at least 1/3 of
the fan's capacity.
Switch off heater or ventilation
Hold the transmitter with the aerial upright and press the
OFF button until the LED lights up (approx. 1 second).
The transmitter will send a feedback signal.
Switching off using the pushbutton switch
If the heater was activated by means of Telestart, the pushbutton switch must
be pressed once for deactivation.