Operation Manual

18
GB
Feedback from the transmitter upon turning on/off
Switch on heater or ventilation
Hold the transmitter with the aerial upright and press the
ON button until the LED lights up (approx. 1 second).
The LED on the hand-held transmitter indicates whether
the signal has been received. After the signal has been
received, the heating or ventilation operation is indicated
by means of brief blinking signals (every 2 seconds).
The operation indicator extinguishes:
–After the preset operating time has elapsed.
–When Telestart is switched off.
The LED on the transmitter
lights up for 2 seconds:
red = heating mode
green = ventilation mode
The signal has been received and the heater /
vehicle fan switched on or off.
The LED on the transmitter
flashes for 2 seconds.
Error during signal transmission. Change your
location and repeat transmission.