Unit installation

20
Mercedes-Benz E-Class BR 211 / CLS BR 219
Insert a screw driver in the fuel pump
mounting bracket hole and bend the strap to
align it for free access to the fuel pump from
the adjacent components.
1 Suction side of the fuel line
2 Fuel pump mounting bracket
Align the
fuel pump
bracket
Cut the fuel line on the fuel pump into
sections and connect to the fuel pump outlet
(side with connector) with fuel line coupler
and clamps.
Route the connector for the fuel pump
to the fuel pump and connect.
1 Universal clamps Ø10 mm,
(white color identification) [2x]
2 Fuel pump connector
Assembl-
ing the fuel
pump
connector
Install the fuel line along the original vehicle
lines.
Where the hose sections (wear protection)
are already located,fasten with cable ties.
Use split fuel hose as an additional wear
protection if necessary.
1 Cut open end piece
2 Cable ties
3 Protection from wear (present)
Fuel line
installation
49
1
2
50
2
1
51
1 2
3