Unit installation

19
Mercedes-Benz E-Class BR 211 / CLS BR 219
Assembling the fuel pump
1 Fuel line coupler 90°
2 Fuel pump
3 Rubber bracket
4 Universal clamp Ø10 mm,
(white color identification) [4x]
5 Fuel line coupler [2x]
6 Mecanyl fuel line 1=130 mm
Fuel pump
pre-
assembly
Install the fuel pump mounting bracket (with
M6x25 collar screw) on the original vehicle
bolts with plastic nuts.
1 M6x25 collar screw
2 Plastic nuts [2x]
3 Fuel pump mounting bracket
Installing
the fuel
pump
mounting
bracket
Note the installation position of the metering
pump, see the "Installation Instructions".
Secure the fuel pump bracket to the M6x25
collar bolt with nut provided.
1 Flanged nut M6
2 Bracket with fuel pump
Assembl-
ing the fuel
pump
Remove the cap and pull the end of the fuel
nipple out of the fuel tank.
Cut the end of the fuel nipple off with a sharp
knife. Immediately connect the fuel line
between the fuel tank nipple and the suction
side of the fuel pump and tighten clamp.
1 Fuel nipple on the tank
Cutting off
the end of
the fuel
nipple
45
21 3 4
6
5
46
2
3
1
47
1
2
48
1