Unit installation

11
Mercedes-Benz E-Class BR 211 / CLS BR 219
Route the wiring harness for
the fuel pump
Route the connector for the wiring harness for
the fuel pump through the cable conduit to the
rear seat bench.
Route behind the back cover next to the arm
rest to the plug connector.
1 Cable conduit cover
2 Rocker panel cable conduit
Place
in cable
conduit
Remove the red gasket piece from the free
slot in the terminal strip (no longer needed).
Insert the connector for the fuel pump wiring
harness in the slot.
1 Connector for the fuel pump wiring harness
2 Wheel case terminal strip
Connector
for fuel
pump in
passenger
compart-
ment
Plug the connector on the short wiring
harness to the fuel pump from the
wheelhouse to the corresponding slot.
1 Plug
Fuel
pump
connector
in wheel
house
Open the fastening lugs for the wiring
harness guide.
Route the wiring harness down through the
guide to the fuel pump and fasten.
1 Wiring harness guide fastening lug
Wiring
harness
guide in
the wheel
house
20
1
2
21
1
2
22
1
23
1