Installation Manual

Webasto Air Top Installation Guide – AT2000STC
20
Air Top 2000STC Installation Guide 2018 | Webasto Thermo & Comfort Australia Pty Ltd.
Turn the Control Knob to choose the desired heating mode
Options available: Eco (Power Saving Mode); Normal (Comfort Heating); Boost (Rapid Heat)
Press the Control Knob to confirm selection
NOTE: Eco and Boost modes are not available for the AT2000STC
Turn the Control Knob in order to choose the desired temperature
(Temperature range: 5 - 35⁰C)
Press the Control Knob to confirm selection
The programmed timer is saved and shown on the display
Press the Control Knob to activate the programmed time
“Activate” message will appear on the display
Repeat the process to add timers (3 timer settings per day, 21 per week)