Installation Manual

Webasto Air Top Installation Guide – AT2000STC

Air Top 2000STC Installation Guide 2018 | Webasto Thermo & Comfort Australia Pty Ltd.

10 Multi-Control Set-Up & Operations Guide

10.1 Set-Up

Initial Start-Up

When the Control unit is connected for the first time, a message about the Setting/Configuration of the heater is

displayed.

1 Menu Name

2 Menu Symbols

3 Time Setting Activated

4 Time

5 On / Off Button

6 Control Knob

Timer

Heating

Ventilation

Settings

Press the control knob and the On/Off Button simultaneously for 3 seconds

Select your Heater (Note: AirTop Evo 40/55 is displayed as AT 40/55)

Press the Control Knob

Select the current Day

Press the Control Knob

Select the current Time - turn the Control Knob clockwise to select Hour, press the Control Knob to

confirm, then turn the Control Knob clockwise again to select the Minutes, press the Control Knob to

set.

Press the Control Knob