Specifications

Operation / Installation Manual – FCF 5000, 9000, 12000, 16000, 24000
Page 23
Battery Replacement in Remote Controller
Remote controller battery requirements: Two AAA alkaline cells.
1. Slide the cell cover downward to take out the worn
cells. Replace the worn cells. (Note to the correct
polarity).
2. Close the cell cover.
3. The LCD will show all the functional figures and letter
codes after the batteries are installed. Wait
approximately 10 seconds for normal use.
4. The life span of batteries is approximately 1 year.
(Depending on usage)
5. If the remote controller doesn’t work after the batteries
have been replaced, remove the back cover and press
the “ACL” button to reset the controller.