Datasheet

Technical specifications
Electrical characteristics
Nominal current (A)
(configurable connected load values)
Up to 32
Single phase or 3-phase
10, 13, 16, 20, 25, 30, 32 A (configurable via DIP-switches)
or in 1 A steps (via integrated WebUI or Webasto Charger Setup App)
Line voltage (V AC) 230 / 400 (Europe)
Grid frequency (Hz) 50 / 60
Grid forms TT / TN / IT (single phase and 3-phase)
Splitphase (L1 + L2, without N)
EMC class Emitted interference: class B (residential, business, commercial areas)
Immunity: residential, business, commercial and industrial areas
Overvoltage category III as per EN 60664
Protection class I
Necessary protective equipment Residual current circuit breaker RCD type A and miniature circuit breakers must be
provided on the installation side
Integrated protective equipment ≥6 mA DC residual current protection
Integrated Energy Meter MID conformal Class B (1%) energy meter according to EN50470-1/ 3
Welded relais detection 230 V contact to trigger an external shunt trip
Connections
Mounting Wall and pole mounting (permanently connected)
Cable feed Mounted on-wall or in-wall
Connection cross-section (wire dimension) Cross-section of the connecting cable (Cu) taking
into account the local conditions and norms:
– rigid (min. – max.) 2.5 – 10 mm
2
;
– flexible (min. – max.) 2.5 – 10 mm
2
;
– flexible (min. – max.) with wire end ferrules: 2.5 – 10 mm
2
Charging Outlet IEC 62196 Type-2 socket outlet without shutter (5112415A)
Output voltage (V AC) 230 / 400
Max. charging capacity (kW) 7.4 (1-phase operation)
22 (3-phase operation)
Communication & features
Backend Webasto ChargeConnect
Authentication – ”Scan & Charge“ via QR code
– Webasto ChargeConnect Portal
– Webasto ChargeConnect App
– RFID reader (ISO 14443 A / B and ISO 15693)
Display RGB-LED, meter display window
Network interfaces – LAN (RJ45) – 10 / 100 Mbps
– WiFi 802.11a / b / g /n / ac - 2,4 GHz and 5 GHz
– Cellular
3)
(only 5112415A) : LTE: B1 (2100 MHz), B3 (1800 MHz),
B7 (2600 MHz), B8 (900 MHz), B20 (800 MHz), B28A (700 MHz)
WCDMA: B1 (2100 MHz), B8 (900 MHz), GSM: B3 (1800 MHz), B8 (900 MHz)
Communication protocols OCPP 1.6 J (OCPP 2.0 ready), Modbus TCP (EMS)
1)
, Modbus RTU (smart meter)
2)
External interfaces – Addressable via ripple control receiver through dry contacts
– Integration into Energy Management Systems (EMS) via Modbus TCP
1)
– Contact for welded relay protection
– RS485 interface for external smart meters
2)
Local load management – Dynamic (stand-alone) via integration of a compatible external smart meter
2)
– Dynamic (cluster with up to 32 charging points) via integration of a compatible
external smart meter
2)
– Static (cluster with up to 32 charging points)
Mechanical data
Dimensions (W × H × D) (mm) 315 x 460 x 135
Weight (kg) 5
IP protection class, device IP54
Protection against mechanical impact IK10 (Display: IK08)
Ambient conditions
Installation site No direct solar radiation
Operating temperature range (°C) -35 to +55
Temperature behavior A reduction in charging current or shutdown may occur in order
to prevent the charging station overheating.
Storage temperature range (°C) -40 to +80
Permissible relative humidity (%) 5 to 95 non-condensing
Altitude (m) Max. 4.000 above sea level
Certification compatibility
Standards and guidelines – CE conformity
– 2014 / 53 / EU Radio Equipment Directive
– 2011/ 65 / EU RoHS Directive
– 2012 / 19 / EU Waste Electrical and Electronic Equipment Directive
– 1907/ 2006 REACH Regulation
webasto-charging.com
Webasto Thermo & Comfort SE
Friedrichshafener Straße 9
82205 Gilching
Germany
04/23 • Errors and omissions excepted • Printed in Germany • © Webasto Thermo & Comfort SE 2023
1)
Compatible EMS: see compatability list on our website.
2)
Compatible smart meter: see compatability list on our website.
3)
Micro SIM card slot included. SIM card not included.