Use and Care Manual

Home Charging Dock
Model EVSE-RS
Before charging...
Is the ‘POWER PRESENT’ light on?
Is the ‘READY TO CHARGE’ light on?
Is the ‘TROUBLE’ light off?
For assistance, call Customer Support at [phone].
Charge Smarter. Drive Farther.™
0111_10168
VEHICLE CONNECTED
1
2
3
TROUBLE
VEHICLE CHARGING
5
ST A RT
STO P
ST A RT
STO P
6
8
ST A RT
STO P
4
7
S
T
T
A
R
S
T
O
P
S
T
T
A
R
S
T
O
P
POWER PRESENT
READY TO CHARGE
VEHICLE CONNECTED
VEHICLE CHARGING
TROUBLE
S
T
T
A
R
S
T
O
P
S
T
T
A
R
S
T
O
P
Remove the connector from the
vehicle. Rewrap the charging cable
around the cable hanger, and insert
the Connector into the charging
dock for storage.
WARNING: Failure to rewrap
cable could result in tripping
or strangulation hazard.
You are now ready to drive!
Press the button on the
connector to release it
from the charging dock.
Charging will begin
automatically. When
charging begins, the
VEHICLE CHARGING
light will start to blink.
There is no need to
press START.
Unwrap the cable from
around the cable hanger.
Charging will stop automatically
when complete. Or, you can
manually stop charging by
pressing STOP. In either case,
when the READY TO CHARGE
light blinks, remove the
connector from the vehicle
charge port. If you manually
paused charging by pressing
STOP, you can press START
to resume charging.
Insert connector firmly into
the vehicle charge port.
When fully inserted, the
VEHICLE CONNECTED
light on the charging dock
will illuminate.
When the VEHICLE
CHARGING light stops
blinking on the charger,
press the button on the
connector to release.
Pull to remove from
vehicle charge port.
Read and follow the User’s Manual before attempting to use your Home Charging Dock. Failure to follow each instruction could result in serious injury or death. The following
instructions are intended as a quick guide for using your Home Charging Dock and are not intended to be a substitute for reading and following each instruction in the User’s Manual.
Quick Start Guide