User`s guide

Web Mountain Technologies Page 54
In the text box for host / IP, we highly recommend using the IP address of the RUC rather than
the host name (we also highly recommend that the RUC have a fixed IP address in order to take
advantage of the Chumby / Dash app). We have found that some networks struggle with host
names, and the actual IP address eliminates any confusion. This is the IP address of your RUC
unit.
In most cases, you can leave the username and password. These are the default values for the
RUC. If you have changed those, then you will need to change this configuration to match your
new values.
Then, you will see the box checked for Auto-load text from RUC? If this box is checked, then
the App pulls the labeling for buttons from the RUC, saving the effort of labeling the buttons.
All you need to do at this point is click on Submit. If it’s not checked, then click NEXT so that
you can enter in text for the buttons and the page.
Your screen will look like this:
To move to page 2, 3, or 4, as desired, click NEXT. Create your labels. Once you’re done, then
click Submit. Your app is now configured.
Now, when you click on any button, it will cause the same action to occur as if you clicked on
that button on the RUC.
One thing – before you download this onto your PNA, go to the customize button on each app
and set the amount of time you want each app to show for – I typically use 15 seconds.