Specifications

EN.PM.UM13 20140227 Earth Networks Weather Station Page 23 of 47

3. Routethewindcabledownthemastandthroughtheopeninginthebottom
plateoftheSensorShelter.Connecttheyellowendofthewindcabletothe
WINDconnectorinthecenterontheTRH.Insertthecableintothesocket.
Rotatetheconnectorclockwisetolockit.(TheWINDconnectorhasayellow
washerthatmatchestheyellowbandofthewindcable.)

4. Usingthetablebelow,selecttheproperDataCableforyourinstallation.
WeatherStationOnly WeatherStation&LightningSystem
Removethe200'DataCablefromthe
shippingboxandremovewireties.
Thisisthecablethatconnectsthe
outdoorTRHtotheindoorENNA.
Removethe15'LightningTRHCable
fromtheLightningSystembox;this
cablewillconnecttheTRHtothe
LightningDSP.
Alsoremovethe200'8pinDataCable
fromtheLightningSystembox;this
cablewillconnecttheLightningDSP
totheindoorENNA.
**200'4PINDataCablefromthe
WeatherStationboxwillnotbeused
inthisinstallation.

Note:ThereareINDOORandOUTDOORlabelsoneitherendofthecable.

5. Routethe200'DataCablelabeled"OUTDOOR"orwhitebandedendofthe15'
LightningTRHCablethroughthesideopeningofthebottomplateand
connecttotheDATAconnectorattheleftontheTRH.Insertthecableinto
thesocket.Rotatetheconnectorclockwisetolockit.(DATAconnectorhasa
whitewasherthatmatchesthewhitebandoftheDataCable.)
