Instruction manual

BBB Weather Station Manual
Version 1.0, Release 1 January 2005
- 42 -
Calibration
If your WeatherBug Weather Station is properly installed, only the time and barometric
pressure will need to be calibrated. The barometric pressure sensor must be adjusted to
compensate for altitude differences between the WeatherBug weather station
production/testing location and your installation site. The weather station time is typically
pre-set to US Eastern Standard Time (EST). All other calibration is performed prior to
shipment.
The WeatherBug Weather Station is designed for remote calibration by WeatherBug via the
Internet. You must properly configure your weather station for remote access to enable
remote calibration by WeatherBug Technical Support.
Part of the equation for barometric pressure is elevation. WeatherBug has already entered
your general elevation. If possible, please provide your exact Latitude/Longitude/Elevation
if you have this information available via a GPS system. If not, please confirm the address
for the installation location so that an exact Latitude/Longitude/Elevation can be entered to
ensure your site plots properly in the WeatherBug products.
WeatherBug Technical Support:
800-624-4205
[e-mail]
Monday - Thursday -- 8:00am-7:00pm EST
Friday -- 8:00am-5:00pm EST