Instruction manual

BBB Weather Station Manual
Version 1.0, Release 1 January 2005
- 3 -
DISCLAIMER
The procedures, methods and hardware outlined in this manual are intended to provide
general guidelines for installing a WeatherBug Weather Station. Individual sites often have
unique requirements that require materials and specifications that are beyond the scope of
this manual.
All procedures, methods and hardware used to install a WeatherBug Weather Station must
conform to all applicable building codes (local, state and national). Installation
subcontractors are responsible for complying with all applicable codes. Buyer- and/or
installer-provided hardware must be equivalent or better (according to industry standards)
than that specified in the WeatherBug Weather Station installation manual.
The buyer/installer is responsible for any damage caused by installation of the WeatherBug
Weather Station. Furthermore, the buyer/installer is responsible for damage caused as a
result of improper or faulty installation.
THINK SAFETY FIRST! READ THE GETTING STARTED
SECTION OF THIS MANUAL FOR HELPFUL SAFETY TIPS.
Special Note to Buyer/Installer:
Contact WeatherBug Weather Station Technical Support as soon as your WeatherBug
Weather Station installation is complete. WeatherBug must remotely access your weather
station's data to verify proper operation. Call WeatherBug Weather Station Technical
Support even if remote communications are not available at the time of installation.
WeatherBug Weather Station Technical Support:
800-624-4205
[e-mail]
Monday - Thursday -- 8:00am-7:00pm EST
Friday -- 8:00am-5:00pm EST