Instruction manual

BBB Weather Station Manual
Version 1.0, Release 1 January 2005
- 29 -
Connecting the Indoor Weather Station Components
1. Connect the Power Supply to the BlueBugBox (BBB) and ensure that power is in
OFF position.
2. Find the end of Data Cable coming from your outdoor sensors. Place the connector
so that the arrow is on top and connect it to the back of the BBB, under the "Data
Cable" label (be sure the connector is positioned properly).
3. If applicable, connect the optional Auxiliary Temperature Sensor to the BBB.
4. If applicable, for the optional Digital Display, connect other end of 25-foot Display
Cable cord (“telephone line”) to the Digital Display (See the Digital Display
Operations Manual for Digital Display installation instructions).
5. Using the supplied Ethernet LAN Cable, plug the BBB into your Local Area
Network (LAN) or Internet Connection.
6. Plug the BBB and optional Digital Display Power Supplies into the Power Strip.
INDOOR WEATHER STATION CONNECTIONS