Instruction manual

BBB Weather Station Manual
Version 1.0, Release 1 January 2005
- 17 -
Tools Required
The following is a list of tools necessary to install the outdoor WeatherBug Weather Station
and route the data cables into the building (actual tool requirements may vary depending on
site configuration):
1. Compass
2. Step ladder (6-8 feet)
3. Level
4. Electric drill and masonry drill bits
5. Flathead and Phillips screwdrivers
6. Adjustable wrench
7. Wrenches
• 7/16 inch for Sensor Shelter nuts
• 3/8 inch for mast mounting brackets
• 1/2 inch for mast mounting brackets
• 9/16 inch for mast mounting brackets
• 5/8 inch for mast mounting brackets
8. Pliers
9. Socket set (optional)
10. Wire cutters for cable ties